application note r20an0162ej0110 rev.1.10 p age 1 of 3 jan 16, 201 4 RX62G, rx62t group renesas peripheral driver library i ntroduction this application note describes the introductory procedure of renesas peripheral driver library for rx families. targ et device RX62G, rx62t group contents 1. overview ........................................................................................................................................... 2 2. bundled items and the version .......................................................................................................... 2 3. supported device manual ................................................................................................................. 2 4. supported tools ................................................................................................................................ . 2 5. introductory procedure ...................................................................................................................... 2 r20an0162ej0110 rev.1.10 jan 16, 201 4
RX62G, rx62t group renesas peripheral driver library r20an0162ej0110 rev.1.10 p age 2 of 3 jan 16, 201 4 1. overview the renesas peripheral driver library (rpdl) is a unified api for controlling the peripheral modules on the microcontrollers made by renesas electronics. the renesas peripheral driver library is bundled with renesas starter kits and the peripheral driver generator. 2. bundled items and the v ersion renesas peripheral driver library RX62G, rx62t group renesas peripheral driver library v 1 . 1 0 renesas peripheral driver library source program v. 1 . 10 for RX62G, rx62t group user's manual ( english only) RX62G, rx62t group renesas peripheral driver library users manual rev. 1 . 11 ( r20ut2213ee0111 ) library selection (copy) batch file unzip the downloaded file - 3. supported device manual this product is developed b ased on the following manual. ? RX62G, rx62t group user?s manual: hardware rev. 2. 00 document number: r01uh003 4 jj0 20 0 (japanese) or r01uh003 4 ej0 20 0 (english) 4. supported tools this product can be used with the following tools. ? c/ c++ compiler for rx family v.1.02 release 01 5. introductory procedure 5.1 unzip the downloaded file this product can be used with the following tools. ? renesas peripheral driver library self - extracting file (library and batch file) ? renesas peripheral driver libr ary source program zip file ? user's manual (english only) pdf file 5.2 usage after unzipping the file, refer to the user's manual "1. introduction" and use the renesas peripheral driver library. 5.3 limitations ? r5f562t x gdff for two - motor control supported version are not supported . ? asynchronous start bit edge detection function of sci is not supported. (rxdesel bits)
RX62G, rx62t group renesas peripheral driver library r20an0162ej0110 rev.1.10 p age 3 of 3 jan 16, 201 4 website and support renesas electronics website http://www.renesas.com/ inquiries http://www.renesas.com/contact/ all trademarks and registered trademarks are the property of their respective owners.
a-1 revision record rev. date description page summary 1.00 mar 09 , 2012 first edition issued 1 . 01 nov 29, 2012 changed document title 1.10 jan 16, 2014 rx6 2g, rx62t group renesas peripheral driver library which corresponds to RX62G, rx62t g r oup users manual: hardware rev. 2. 00 is released.
general pr ecautions in the handling of mpu/mcu products the following usage notes are applicable to all mpu/mcu products from renesas. for detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any t echnical updates that have been issued for the products. 1. handling of unused pins handle unused pins in accordance with the directions given under handling of unused pins in the manual. ? the input pins of cmos products are generally in the high - impedanc e state. in operation with an unused pin in the open - circuit state, extra electromagnetic noise is induced in the vicinity of lsi, an associated shoot - through current flows internally, and malfunctions occur due to the false recognition of the pin state as an input signal become possible. unused pins should be handled as described under handling of unused pins in the manual. 2. processing at power - on the state of the product is undefined at the moment when power is supplied. ? the states of internal circuits in the lsi are indeterminate and the states of register settings and pins are undefined at the moment when power is supplied. in a finished product where the reset signal is applied to the external reset pin, the states of pins are not guaranteed from the moment when power is supplied until the reset process is completed. in a similar way, the states of pins in a product that is reset by an on - chip power - on reset function are not guaranteed from the moment when power is supplied until the power reaches the level at which resetting has been specified. 3. prohibition of access to reserved addresses access to reserved addresses is prohibited. ? the reserved addresses are provided for the possible future expansion of functions. do not access these addresses; the correct operation of lsi is not guaranteed if they are accessed. 4. clock signals after applying a reset, only release the reset line after the operating clock signal has become stable. when switching the clock signal during program execution, wait until the target clock signal has stabilized. ? when the clock signal is generated with an external resonator (or from an external oscillator) during a reset, ensure that the reset line is only released after full stabilization of the clock signal. moreover, when switching to a clock signal produced with an external resonator (or by an external oscillator) while program execution is in progress, wait until the target clock signal is stable. 5. differences between products before changing from one product to another, i.e. to a product with a different part number, confirm that the change will not lead to problems. ? the characteristics of an mpu or mcu in the same group but having a different part number may differ in terms of the internal memory capacity, layout pattern, and other factors, which can affect the ranges of electrical characteristics, such as characteristic values, operating margins, immunity to noise, and amount of radiated noise. when changing to a product with a different part number, implement a syst em - evaluation test for the given product.
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesas electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-owned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-651-700, fax: +44-1628-651-804 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 301, tower a, central towers, 555 langao rd., putuo district, shanghai, china tel: +86-21-2226-0888, fax: +86-21-2226-0999 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 12f., 234 teheran-ro, gangnam-gu, seoul, 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2013 renesas electronics corporation. all rights reserved. colophon 3.0 ? 2014 renesa s electronics corporation and renesas solutions corp. colophon 3.0
|
